Crosby® S-423T Wedge Sockets

  • The 423T wedge socket terminations have a minimum efficiency rating on most high-performance, high-strength, compacted-strand, rotation-resistant wire ropes of 80% based on the catalog breaking strength of the various ropes.
  • Design eliminates the difficulty of properly seating the wedge with high performance wire rope into a wedge socket termination.
  • Proper application of the Super Terminator eliminates the 'first load' requirement of conventional wedge socket terminations.
  • S-423TW Wedge Kit can be retrofitted onto existing Crosby S-421T Terminator Wedge Sockets.
  • Wedge and accessories provided with a zinc finish.
  • Meets the performance requirements of EN13411-6.
  • Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements. Importantly, these sockets meet other critical performance requirements, including fatigue life, impact properties, and material traceability not addressed by ASME B30.26.
  • Basket is cast steel and individually magnetic particle inspected.
  • Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets.
  • Secures the tail or dead end of the wire rope to the wedge, thus eliminates loss or punch out of the wedge.
  • Eliminates the need for an extra piece of rope, and is easily installed.
  • The Terminator wedge eliminates the potential breaking off of the tail due to fatigue.
  • The tail, which is secured by the base of the clip and the tension device, is left undeformed.
  • Available with bolt, nut, and cotter pin: S-423TB.
  • Available with API-2C certification upon request.
  • Wedge sockets meet the performance requirements of Federal Specification RR-S-550F, Type C, except those provisions required of the contractor.
  • The S-423T Super Terminator wedge is designed to be assembled only into the Crosby S-421T Terminator socket body. Important: The S-423TW for sizes 5/8" through 1-1/8" will fit respective size standard Crosby S-421T basket. The 1-1/4" S-423TW will only fit the Crosby S-421T 1-1/4" basket marked with Terminator.
  • Weight Each (lb): 12.7
  • Weight Each (lb): 39.2
  • Weight Each (lb): 57.1
  • Weight Each (lb): 28.8
  • Weight Each (lb): 19.4
  • Weight Each (lb): 88.6
  • UPC: 662547351337
  • Product Length (in): 12.32
  • Product Width (in): 5.02
  • Product Height (in): 3.47
  • UPC: 662547351504
  • Product Length (in): 19.81
  • Product Width (in): 7.09
  • Product Height (in): 5.2
  • UPC: 662547351696
  • Product Length (in): 21.41
  • Product Width (in): 8.11
  • Product Height (in): 5.94
  • UPC: 662547351412
  • Product Length (in): 17.93
  • Product Width (in): 6.44
  • Product Height (in): 4.69
  • UPC: 662547351321
  • Product Length (in): 14.89
  • Product Width (in): 5.99
  • Product Height (in): 4
  • UPC: 662547351788
  • Product Length (in): 24.7
  • Product Width (in): 9.75
  • Product Height (in): 6.66