Bolt Type Shackles

Crosby® 2140 Bolt Type Shackles

  • Quenched & Tempered.
  • Alloy bows, alloy bolts.
  • Forged alloy steel 2 through 250 metric tons. Cast alloy steel 400 metric tons.
  • Meets performance requirements of Grade 8 shackles.
  • Working Load Limit is permanently shown on every shackle.
  • 30, 40, 55, and 85 metric ton shackle bows are available galvanized (G) or self colored (S) with bolts that are galvanized and painted red.
  • Sizes 3/8 inch and below are mechanically galvanized.
  • 120, 150, 175 metric ton shackle bows are hot-dip galvanized; bolts are Dimetcoted and painted red.
  • 200, 250, 300, 400 metric ton shackle bows are Dimetcoted; bolts are Dimetcoted and painted red.
  • Sizes 1-1/2 and larger are RFID equipped.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-lb) at -20° C (-4° F).
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications - loose gear are available.
  • Shackles 200 metric tons and larger are provided as follows:
    • Serialized bolt and bow
    • Material certification (chemical)
    • Magnetic particle inspected.
    • Certification must be requested at time of order.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. 2140 shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliances. Certificates available when requested at time of order and may include additional charges.
  • G-2140 meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor. For additional information, see Warnings & Applications.
  • Look for the Red Pin®... the mark of genuine Crosby quality.
Learn More

Crosby® G-2130A Bolt Type Shackles

  • Forged alloy steel, Quenched & Tempered, with bow and bolt.
  • Meets or exceeds all requirements of Grade 8 shackles.
  • Working Load Limit permanently shown on every shackle.
  • Hot-dip galvanized.
  • Shackles can be RFID equipped.
  • Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements. Importantly, G-2130A meet other critical performance requirements, including impact properties, and material traceability not addressed by ASME B30.26.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
  • Type Approval and certification in accordance with DNV 2.7-1 offshore containers.
  • Shackles are Quenched & Tempered and meet DNV impact requirements of 42 Joules (31 ft-Ib) at -40° C (-40° F).
  • G-2130A Bolt Type Anchor shackles with thin head bolt
    • nut with cotter pin. Meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor.
Learn More

Crosby® 2130 Bolt Type Shackles

  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Forged, Quenched & Tempered, with alloy bolts.
  • Hot-dip galvanized (G) or self colored (S). 85, 120, and 150-metric ton shackles are all hot-dip galvanized bows and the bolts are Dimetcoted® and painted red.
  • Sizes 3/8 and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit (1/3t - 55t).
  • Shackles 25t and larger are RFID equipped.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • Meets or exceeds all requirements of ASME B30.26.
  • Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • 3.1 Certification as standard available for charpy and statistical proof test from 3.25t up to 25 tons to DNV 2.7-1 and EN13889.
  • Crosby 3.25t through 25t G-2130OC anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 Joules (31 ft-lb) min. avg. at -20° C (-4° F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
  • All other 2130 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F) when requested at time of order.
  • Meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
  • Look for the Red Pin®... the mark of genuine Crosby quality.
Learn More

Crosby® 2150 Bolt Type Shackles

  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Forged, Quenched & Tempered, with alloy pins.
  • Hot-dip galvanized (G) or self-colored (S). 85 ton shackles have hot-dip galvanized bows and the bolts are Dimetcoted® and painted red.
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. (1/2t - 55t).
  • Shackles 25t and larger are RFID equipped.
  • Approved for use at -40° C (-40 degrees F) to 204° C (400° F).
  • Meets or exceeds all requirements of ASME B30.26.
  • Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.
  • Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance. Certificates available when requested at time of order and may include additional charges.
  • Meets the performance requirements of Federal Specification RR-C-271G, Type IVB, Grade A, Class 3,except for those provisions required of the contractor.
  • All 2150 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg at -20° C (-4° F) upon special request.
  • Look for the Red Pin®... the mark of genuine Crosby quality.
Learn More

Crosby® G-2140CT Bolt Type Shackles

  • Forged - Quenched and Tempered, with alloy bolt.
    • G-2130CT - Carbon Steel
    • G-2140CT - Alloy Steel
  • Working Load Limit permanently shown on every shackle.
  • Individually serialized with certification.
  • Fatigue Rated (G-2130CT only).
  • Shackles 25t and larger are RFID EQUIPPED.
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Finish is inorganic zinc primer.
  • Bow and bolt are certified to meet Charpy impact testing of 42 Joules (31 ft-lb) min. avg. at -20° C (-4° F).
  • Individually magnetic particle inspected with certification.
  • Type Approval and certification in accordance with DNV 2.7-1 Offshore Containers, and Rules for Certification of Lifting Appliances, DNV-OS-E101 and are produced in accordance with DNV MSA requirements, including required documents.
  • DNV certified minimum design temperature -4° F. May be used at -50°F (-45° C) in non DNV applications.
  • Meets the performance requirements of Federal Specification RR-C-271G Type IVA:
    • G-2130CT - Grade A, Class 3, except for those provisions required of the contractor.
    • G-2140CT - Grade B, Class 3, except for those provisions required of the contractor.
Learn More

Crosby® G-2140E Bolt Type Shackles

  • Quenched & Tempered.
  • Alloy bows, alloy bolts.
  • Meets performance requirements of Grade 8 shackles.
  • Working Load Limit is permanently shown on every shackle.
  • 200, 250, and 300 metric ton shackle bows are Dimetcoted®; Pins are Dimetcoted and painted red.
  • All sizes are larger than 1-1/2 IN, RFID equipped.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-lb) at -20° C (-4° F).
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Shackles are provided as follows:
    • Serialized bolt and bow
    • Material certification (chemical)
    • Magnetic particle inspected
    • Certification must be requested at time of order
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliances. Certificates available when requested at time of order and may include additional charges.
  • G-2140E meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor.
  • Look for the Red Pin®... the mark of genuine Crosby quality.
Learn More

Crosby® G-2130CT Bolt Type Shackles

  • Forged, Quenched & Tempered, with alloy bolt.
    • G-2130CT - carbon steel
    • G-2140CT - alloy steel
  • Working Load Limit permanently shown on every shackle.
  • Individually serialized with certification.
  • Fatigue Rated (G-2130CT only).
  • Shackles 25t and larger are RFID equipped.
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Finish is inorganic zinc primer.
  • Bow and bolt are certified to meet Charpy impact testing of 42 Joules (31 ft-lb) min. avg. at -20° C (-4° F).
  • Individually magnetic particle inspected with certification.
  • Type Approval and certification in accordance with DNV 2.7-1 Offshore Containers, and Rules for Certification of Lifting Appliances, DNV-OS-E101 and are produced in accordance with DNV MSA requirements, including required documents.
  • DNV certified minimum design temperature -4° F. May be used at -50° F (-45° C) in non DNV applications.
  • Meets the performance requirements of Federal Specification RR-C-271G Type IVA:
    • G-2130CT - Grade A, Class 3, except for those provisions required of the contractor.
    • G-2140CT - Grade B, Class 3, except for those provisions required of the contractor.
Learn More