Hooks

Crosby S-1326 Shur-Loc® Hooks

  • The S-1326 hook is a positioning device and is not intended to rotate under load. For swivel hook designed to rotate under load, use the S-13326.
  • S-13326 Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under load.
  • Rated for both wire rope and for use with Grade 80/100 chain.
  • Forged alloy steel, Quenched & Tempered.
  • Individually Proof Tested at 2-1/2 times the chain Working Load Limit with certification.
  • Recessed trigger design is flush with the hook body, protecting the trigger from potential damage. Easy to operate with enlarged thumb access.
  • Positive lock latch is self-locking when hook is loaded.
  • Trigger repair kit available (S-4316). Consists of spring, roll pin, and trigger.
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.
  • The SHUR-LOC® Hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
Learn More

Crosby BL-D / BL-B Bullard Golden Gate® Hooks

  • For use on existing load blocks, with standard shank length.
    • BL-D with self-closing gate
    • BL-B with manual-closing gate
  • Numbers 2 through 12 style hooks are threaded approximately 80% of shank length.
  • Crosby Bullard® Hooks incorporate QUIC-CHECK® deformation and angle indicators. (For detailed information, see the Crosby Value Added page at the beginning of this section.)
Learn More

Crosby S-1316 Shur-Loc® Hooks

  • All SHUR-LOC® hooks have the following features:
    • Forged alloy steel, Quenched & Tempered.
    • Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
    • Easy to operate with enlarged thumb access.
    • Positive lock latch is self-locking when the hook is loaded.
    • The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
    • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.
    • Contact Engineered Solutions for additional threading or Split-Nut options at thecrosbygroup.com/engineeredsolutions.
  • Eye Style incorporates these added features:
    • Individually Proof Tested to 2-1/2 times the chain Working Load Limit with certification.
    • S-1316 meets the performance requirements of EN1677-3.
    • 25% stronger than Grade 80.
    • Suitable for use with Grade 100 and Grade 80 chain.
    • Designed with 'engineered flat' to connect to S-1325 chain coupler.
Learn More

Crosby S-1318A Shur-Loc® Hooks

  • All SHUR-LOC® hooks have the following features:
    • Forged alloy steel, Quenched & Tempered.
    • Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
    • Easy to operate with enlarged thumb access.
    • Positive lock latch is self-locking when the hook is loaded.
    • The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
    • Contact Engineered Solutions for additional threading or Split-Nut options at thecrosbygroup.com/engineeredsolutions.
Learn More

Crosby BL-E / BL-G Bullard Golden Gate® Hooks

  • Open Swivel Bail for attachment to link chain.
    • BL-E with self-closing gate
    • BL-G with manual-closing gate
  • Suitable for positioning before lifting.
  • Crosby Bullard® Hooks incorporate QUIC-CHECK® deformation and angle indicators. (For detailed information, see the Crosby Value Added page at the beginning of this section.)
Learn More

Crosby BL-GA Self Close Bullard Golden Gate® Hooks

Learn More

Crosby S-1316AH Shur-Loc® Hooks

  • The SHUR-LOC® Handle Hook allows the user to get a confident grip on a load with ease and comfort.
  • Designed with a handle opening big enough to comfortably fit a gloved hand.
  • The replaceable pull-trigger allows the user to easily open the SHUR-LOC’s positive self-locking latch. Ergonomically designed for easy use and precise control. Secondary side trigger is recessed to avoid inadvertent release.
  • All SHUR-LOC® Hooks have the following features:
  • Forged alloy steel, Quenched & Tempered.
  • Positive lock latch is self-locking when hook is loaded.
  • Individually Proof Tested at 2-1/2 times the chain Working Load Limit with certification.
  • Rated for both wire rope and use with Grade 80/100 chain.
  • G-414 Heavy Thimble or G-411 Standard Thimble should be used with wire rope slings.
  • S-13326 Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under load.
  • Fatigue rated.
  • The SHUR-LOC® Hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
  • Each SHUR-LOC® Handle Hook has a serial number.
Learn More

Crosby BL-O / BL-P Bullard Golden Gate® Hooks

  • With ball bearing swivel; attaches to chain by an alloy pin.
    • BL-O with self-closing gate
    • BL-P with manual-closing gate
  • Suitable for frequent rotation under load.
  • Crosby Bullard® Hooks incorporate QUIC-CHECK® deformation and angle indicators. (For detailed information, see the Crosby Value Added page at the beginning of this section.)
Learn More

Crosby S-13326 Shur-Loc® Hooks

  • The S-1326 hook is a positioning device and is not intended to rotate under load. For swivel hook designed to rotate under load, use the S-13326.
  • S-13326 Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under load.
  • Rated for both Wire Rope and for use with Grade 80/100 Chain.
  • Forged alloy steel - Quenched and Tempered.
  • Individually Proof Tested at 2-1/2 times the Chain Working Load Limit with certification.
  • Recessed trigger design is flush with the hook body, protecting the trigger from potential damage. Easy to operate with enlarged thumb access.
  • Positive Lock Latch is Self-Locking when hook is loaded.
  • Trigger Repair Kit available (S-4316). Consists of spring, roll pin and trigger.
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
  • The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
Learn More

Crosby S-13326H Shur-Loc® Hooks

  • The SHUR-LOC® Handle Hook allows the user to get a confident grip on a load with ease and comfort.
  • Designed with a handle opening big enough to comfortably fit a gloved hand.
  • Positive lock latch is self-locking when hook is loaded.
  • Rated for both wire rope and use with Grade 80/100 chain.
  • S-13326H Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under load.
  • Individually Proof Tested at 2-1/2 times the chain Working Load Limit with certification.
  • The replaceable pull-trigger allows the user to easily open the SHUR-LOC’s positive self-locking latch.
    • Ergonomically designed for easy use and precise control.
    • Secondary side trigger is recessed to avoid inadvertent release.
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.
  • Forged alloy steel, Quenched & Tempered.
  • The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
  • Each SHUR-LOC® handle hook has a serial number.
Learn More