Shackles

Screw Pin Anchor Shackles

  • Capacities 1/3 thru 55 metric tons, grade 6.
  • Forged – Quenched and Tempered, with alloy pins.
  • Working Load Limit and grade “6” permanently shown on every shackle.
  • Hot Dip galvanized or self colored.
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated.
  • Shackles 25t and larger are RFID EQUIPPED.
  • Shackles can be furnished proof tested with certificates to desi nated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certificati available when requested at the time of order, charges will apply.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • All 209 and 210 shackles can meet charpy requirements of 42 Joules(31 ft•lbf) avg. at – 20° C (-4° F) upon special request.
  • Meets or exceeds all requirements of ASME B30.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.

Bolt Type Anchor Shackles

  • Capacities 1/3 thru 150 metric tons, grade 6.
  • Working Load Limit and grade “6” permanently shown on every shackle.
  • Forged – Quenched and Tempered, with alloy bolts.
  • Hot Dip galvanized or self colored. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
  • Sizes 3/8 and below are mechanically galvanized.
  • Fatigue rated (1/3t – 55t).
  • Shackles 25t and larger are RFID EQUIPPED.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • Meets or exceeds all requirements of ASME B30.26.
  • Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules
  • ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • 3.1 Certification as standard available for charpy and statistical proof test from 3.25t up to 25 tons to DNV2.7-1 and EN13889.
  • Crosby 3.25t through 25t G2130OC anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 Joules (31 ft•lbf) min. avg. at -20° C (-4° F). The tests are conducted by Crosby and 3.1 test certification is available upon request. Refer to page 87 for Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications – Loose Gear.
  • All other 2130 shackles can meet charpy requirements of 42 Joules (31 ft•lbf) avg at -20° C (-4° F) when requested at time of order.

 

Wide Body Shackles

  • Capacities of 7, 12.5 and 18 metric tons.
  • Quenched and Tempered for maximum strength.
  • Forged Alloy Steel.
  • Available in galvanized and self colored finish
  • Individually proof tested and magnetic particle inspected. Crosby certification available at time of order.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Round Pin Anchor Shackles

  • Capacities 1/2 through 35 metric tons.
  • Forged – Quenched and Tempered, with alloy pins.
  • Working Load Limit permanently shown on every shackle.
  • Hot Dip galvanized or Self Colored.
  • Sizes 3/8 inch and below are mechanically galvanized.
  • Fatigue rated.
  • Shackles 25t and larger are RFID EQUIPPED.
  • Shackles can be furnished proof tested with certificates to des gnated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
  • Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 Joules (31 ft•Ibf) at -20° C (-4° F).